
Antenne FPVLR v2 per DJI Phantom 3 Standard/4K
Raddoppia la portata del segnale radio video e originale
Migliora la qualità del video e penetrazione ostacoli
Puoi acquistare il servizio di installazione
Acquistando questo prodotto puoi ricevere fino a
14
punti.
Il tuo carrello ti offrirà 14
punti convertibili in un voucher di:
1,40 €.
Kit completo per amplificazione antenne FPVLR (2 booster 3W, connettori, batteria 3000mAh e caricatore 12V)
RIVENDITORI UFFICIALI - Garanzia ITALIA 24 mesi
Spedizione LAMPO entro 24/48h se il prodotto è disponibile
Un esperto sempre al tuo servizio!
Kit completo per amplificazione antenne FPVLR (2 booster 3W, connettori, batteria 3000mAh e caricatore 12V)
BOOSTER:
~~Model Name: FPVLR24V1
Operating Range : 2400~2500 MHz
Operating Mode: Bi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switch receiving to transmitting mode
Connector Type: SMA Receptacle (50 ohm)
Input Power: 0 ~ 20 dBm
Transmit Gain: 14 – 17dB
Output Power: 4000 mW
Receiver Gain: ≤ 12 dB
Noise Figure: 3.5 dB typical
Frequency Response: ±1dB
Power Adapter: 12V/2A DC, 100~240V for AC Adapter
Operating Temperature: -20°C to + 70°C
Operating Humidity: Up to 75% relative humidity
Material: Cast Aluminum
Booster Weight: 55 g
BATTERY + CHARGER:
This is a purpose-built 12v li-po battery (nominal 11.1), 3000mah, it features 2 barrel plugs 2.1mm outer and 0.7mm inner diameter in order to power both boosters. It’s very tiny and has an on-off switch, it will give a reliable 2 hour autonomy powering one booster or 1 hour+ powering two boosters.
It was selected for light weight (115gr) in order to be used on the transmitter.
The included charger provides 1A charging current, this means that it will take 3 hours to charge it from completely empty and in most cases a couple of hours to top-up.
Raddoppia la portata del segnale radio video e originale
Migliora la qualità del video e penetrazione ostacoli
Puoi acquistare il servizio di installazione
Based on the ever popular Half Sphere Helix antennas, originally designed by FPVLR, here is a compact kit, with rigid cables spaced 80mm to fit the DJI SPARK and DJI MAVIC Pro/Air controllers. The coax cable is thin and flexible and fits the controllers without using dremel so the mod is completely reversible.
You are going to get more than double the stock range with this kit.
Prevede l\'installazione nel nostro laboratorio
Test finale e spedizione al cliente
Antenne FPVLR per:
10.5dBi CP helix antennas, well suited to the new auto switching (2.4/5.8) DJI transmission system used on P4Pro and Inspire 2
Staffa di supporto per antenne FPVLR con booster per radiocomandi DJI Mavic (tutti i modelli) e Spark
Progetto e stampa by PersonalDrones