Axisflying FC F722 (compatibile con DJI Digital FPV System)
Controller di Volo AxisFlying F7, con Barometro QMP6988, Gyro MPU6000, BlackBox, 6 UART, BEC 5V 3A, tensione di ingresso da 2 a 6S, supporta il sistema DJI HD Digital System e periferiche esterne come GPS, LED, BUZZER e fino a 8 motori.
iFlight Beast F7 55A AIO V2.2 Flight Controller (BMI270)
What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25x25 whoop size board? That would be crazy right? Well, we just did it...
This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let\'s go! DJI Plug&Play plug and so many UARTs most people wouldn\'t even use em\' all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more. Unleash the beast!
HappyModel Antenna 2.4 GHz IPEX1 per Ricevitore ExpressLRS ELRS EP1 RX
Antenna Happymodel a T, 2.4 GHz, connettore IPEX1, progettata per ricevitore Radio Happymodel ELRS EP1 RX e TBS Tracer.
HappyModel Modulo RX 2.4 GHz ExpressLRS ELRS Serie Nano EP1
Il ricevitore della serie nano Happymodel 2.4GHz ELRS, Brandizzato By Radiomaster, aderisce al programma open source basato su ExpressLRS. Sulla base di PP RX, è stato sviluppato questo ricevitore Nano 2.4 GHz della versione ESP8285 denominata EP1 ed EP2. Il modulo RF EP1/EP2 è lo stesso di PP RX e utilizza l\'MCU ESP8285, l\'EP2 RX, a differenza dell\'EP1 RX ha un Antenna ceramica incorporata. Firmware aggiornabile tramite WIFI, bassa latenza e altra frequenza di refresh, quindi questo prodotto è perfetto per l\'utilizzo su Droni FPV Racer, Freestyle e soprattutto Long Range.
iFlight SucceX-D Mini F7 TwinG V2 2-6S Flight Controller (ICM20689)
The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
FrSky Antenna 150mm per RX (IPEX 4)
Antenna FrSky per RX 2.4Ghz, con connettore IPEX 4.
T-Motor F7 PRO Flight Controller con WiFi + Bluetooth
T-Motor\'s F7 Pro Flight Controller has arrived! Enjoy full function in a wireless state! Great for cinematic professional use. This FC features 8 UARTS, WiFi and Bluetooth capabilites, and a 30.5x30.5 mounting pattern.
T-Motor Pacer F7 Flight Controller
T-Motor\'s Pacer F7 USB-C Flight Controller is designed to work seamlessly with the F45A 2.0, F55A Pro II, V45A, P50A, P60A 4-in-1 ESC.
T-Motor Velox V45A V2 ESC 45A 4in1 BLHeli_32 3-6S DShot1200
The V45A 4-in-1 ESC V2 by T-Motor is inspired by the VELOX V2207 and V2306 Motors! The V45A V2 MOS has been upgraded with a 15% performance increase to fly in confidence even during high-current spikes.
T-Motor Velox V50A ESC 50A 4in1 BLHeli_32 3-6S
The Velox V50A 4-in-1 ESC by T-Motor is the ultimate ESC for your build. Adopting the QN3109 1.5 MOS, the V50A has been upgraded with an 18% performance increase to fly in confidence even during high-current spikes.
T-Motor Pacer P50A ESC 50A 4in1 BLHeli_32 3-6S
The P50A 4-in-1 ESC by T-Motor is inspired by the PACER P2208 Motors! This high-performance ESC matches the original BLHeli_32 firmware, so no need to worry about a high current shock, yet you will get a smooth flying experience like never before! This ESC comes with an integrated 10V/2a BEC, which is great for providing more electronic power for the DJI HD VTX and other FPV equipment.
The brand new cooling fin design makes heat dissipation more efficient and guarantees stable power output. Also via design for motor pads make over-current ability stronger and welding easier.
T-Motor F55A PROII ESC 55A 4in1 BLHeli_32 3-6S DShot1200
The F55 Pro II updates the original F55 with a new heatsink design, LED, and increased the BEC current to 10V@2A.
Flywoo GOKU 406S 8bit 2-6S 40A 4in1 ESC (20x20)
Flywoo GOKU 406S 8bit 2-6S ESC (20x20)
Flywoo GOKU Versatile F745 Pro Stack (F745 FC + 50A ESC) 8Bit 2-6S (30.5x30.5)
GOKU Versatile F745PRO FC is a versatile and powerful flight control equipped with the smallest but most powerful F745 BGA Chipsets instead of ordinary QFP (Big Size) MCUs. DJI Plug&Play plug and so many UARTs most people wouldn\'t even use em\' all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more.
Flywoo GOKU GNF4 13A V2.1 Stack (F411 FC + 13A ESC) 16x16
Flywoo GOKU GNF4 13A V2.1 Stack (F411 FC + 13A ESC) 16x16
Flywoo GOKU BS 13A 2-4S ESC V2 16x16mm
Flywoo GOKU BS 13A 2-4S ESC V2 16x16mm
HappyModel Modulo RX 2.4 GHz ExpressLRS ELRS Serie Nano EP2
Il ricevitore della serie nano Happymodel 2.4GHz ELRS, Brandizzato By Radiomaster, aderisce al programma open source basato su ExpressLRS. Sulla base di PP RX, è stato sviluppato questo ricevitore Nano 2.4 GHz della versione ESP8285 denominata EP1 ed EP2. Il modulo RF EP1/EP2 è lo stesso di PP RX e utilizza l\'MCU ESP8285, l\'EP2 RX, a differenza dell\'EP1 RX ha un Antenna ceramica incorporata. Firmware aggiornabile tramite WIFI, bassa latenza e altra frequenza di refresh, quindi questo prodotto è perfetto per l\'utilizzo su Droni FPV Racer, Freestyle e soprattutto Long Range.
HappyModel ExpressLRS ELRS 2.4 GHz Kit Modulo ES24TX
Questo Modulo TX, progettato da Happymodel, basato sul Firmware Open Source ExpressLRS, è un modulo RF a bassa latenza e con alta velocità di re-flash. E\' già diventato molto popolare nel mondo dell\'RC, impiegato dagli Hobbysti di modellismo dinamico sia di aerei che piloti di Droni FPV. La sua architettura hardware principale è il chip RF ESP32, ESP8285 e SX1280. Il modulo ES24TX è una soluzione completa già pronta, con Firmware Expresslrs già precaricato e totalmente Plug and Play!
BetaFPV Nano RX 2.4 GHz ExpressLRS ELRS
Il ricevitore BETAFPV Nano si basa sul progetto ExpressLRS, un progetto open source per applicazioni RC. ExpressLRS mira a ottenere le migliori prestazioni di collegamento possibili in entrambe le velocità, latenza e gamma. Ciò rende ExpressLRS uno dei collegamenti RC più veloci disponibili pur offrendo prestazioni a lungo raggio.
BetaFPV Nano RX 868 MHz ExpressLRS ELRS
Il ricevitore BETAFPV Nano si basa sul progetto ExpressLRS, un progetto open source per applicazioni RC. ExpressLRS mira a ottenere le migliori prestazioni di collegamento possibili in entrambe le velocità, latenza e gamma. Ciò rende ExpressLRS uno dei collegamenti RC più veloci disponibili pur offrendo prestazioni a lungo raggio.
iFlight RX ExpressLRS ELRS 2.4GHz + Mini Antenna 70mm
It\'s finally here, the iFlight ELRS System! Extreme range and markets highest packet rate for lowest delay. Failsafes are a thing of the past.
ExpressLRS RX modules developed in close cooperation with the ExpressLRS Team with firmware targets already released.
iFlight RX ExpressLRS ELRS 868/915MHz + Mini Antenna 70mm
It\'s finally here, the iFlight ELRS System! Extreme range and markets highest packet rate for lowest delay. Failsafes are a thing of the past.
ExpressLRS RX modules developed in close cooperation with the ExpressLRS Team with firmware targets already released.
TBS Crossfire Taranis Q X7 Mod
Improve your FrSky QX7 by modding the JR Bay\'s telemetry port to allow 400kbaud throughput speed instead of just 100kbaud.
Lumenier LUX HD Lite F7 Flight Controller
The Lumenier LUX HD Lite F7 Flight Controller is DJI HD System Ready with an on-board 9v regulator to power the DJI Air Unit in a simple plug and play configuration. It uses a powerful F7 processor along with top of the line hardware. Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX HD Lite F7 Flight Controller. This LUX HD Lite F7 comes in a standard 30.5x3.5 form factor weighing only 7g! The bottom of the FC is also completely flat without any components, making it super low profile and easy to stack above a 4in1 ESC for example.
Lumenier ELITE 60A ESC 4in1 2-6S BLHeli_32
Introducing the The Lumenier Elite 60A 2-6S BLHeli_32 4-in-1 ESC. A powerful ESC with the latest BLHeli_32 + telemetry and current sensor and capable of 60A current support on up to 6s! If you\'re looking for maximum power and performance for your quadcopter, this is the ESC for you.
Axisflying ExpressLRS ELRS 2.4GHz RX + Antenna
Axisflying ExpressLRS ELRS 2.4G RX + Antenna
Flywoo Adattatore USB Type-C Maschio / Type-C Femmina
For those hard to reach DJI Air unit and Caddx Vista USB-C port connections this is a great little adapter!
Also works with flight controllers that utilize C-type connector.
Flywoo Adattatore USB Micro Maschio / Type-C Femmina
For those hard to reach flight controllers that have micro usb connector this is a great little adapter!
Flywoo TVS Power Filter PCB
The new filtering solution for FPV hobby, it has the perfect filtering effort on high frequency interference generated by ESC.
TBS Crossfire/Tracer Nano RX Adattatore PWM 6ch
With this board you can enable connectivities with your servos via 6ch PWM.
Flywoo GOKU Versatile F405 Pro Mini Stack (F405 FC + 40A ESC) 8Bit 2-6S (20x20)
Flywoo GOKU Versatile F405 Pro Mini Stack (F405 FC + 40A ESC) 8Bit 2-6S (20x20)
Flywoo GOKU BS 35A 2-6S ESC 16x16mm
Flywoo Goku F4 35A 16X16 STACK, the smallest size! Large output current!
Flywoo GOKU GN745 40A AIO BL_32 V1.2 1MB 25.5x25.5 (MPU6000)
FLYWOO new top GOKU series AIO are finally here! GOKU GNF745 40A FC is currently the highest level of all-in-one FC, which can meet all your FPV needs.
Flywoo GOKU GN405S 40A AIO 25.5x25.5 (MPU6000)
FLYWOO new top GOKU series AIO are finally here! GOKU GN405 40A FC is an economical and durable all-in-one AIO , which can meet most your FPV needs.
Use powerful F405 chip , integrate 5V BEC, barometer, black box, WS2812LED, support 6 complete hardware serial ports, I2C and other functions are all open.
iFlight Whoop AIO F411 V1.1 (BMI270)
iFlight Whoop AIO F411 V1.1 (BMI270)
iFlight BLITZ F7 Pro Flight Controller 35x35
iFlight BLITZ F7 Pro Flight Controller 35x35
iFlight BLITZ E80 4-IN-1 Pro 80A ESC (G2)
The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V.
iFlight BLITZ Modulo BEC
The BLITZ ESC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 35V to a low output stable voltage, which makes it ideal for step-down voltage applications.
iFlight Adattatore Connettore 90° Type-C
iFlight Adattatore Connettore 90° Type-C
Axisflying FC F722 (compatibile con DJI Digital FPV System)
Controller di Volo AxisFlying F7, con Barometro QMP6988, Gyro MPU6000, BlackBox, 6 UART, BEC 5V 3A, tensione di ingresso da 2 a 6S, supporta il sistema DJI HD Digital System e periferiche esterne come GPS, LED, BUZZER e fino a 8 motori.
iFlight Beast F7 55A AIO V2.2 Flight Controller (BMI270)
What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25x25 whoop size board? That would be crazy right? Well, we just did it...
This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let\'s go! DJI Plug&Play plug and so many UARTs most people wouldn\'t even use em\' all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more. Unleash the beast!
HappyModel Antenna 2.4 GHz IPEX1 per Ricevitore ExpressLRS ELRS EP1 RX
Antenna Happymodel a T, 2.4 GHz, connettore IPEX1, progettata per ricevitore Radio Happymodel ELRS EP1 RX e TBS Tracer.
HappyModel Modulo RX 2.4 GHz ExpressLRS ELRS Serie Nano EP1
Il ricevitore della serie nano Happymodel 2.4GHz ELRS, Brandizzato By Radiomaster, aderisce al programma open source basato su ExpressLRS. Sulla base di PP RX, è stato sviluppato questo ricevitore Nano 2.4 GHz della versione ESP8285 denominata EP1 ed EP2. Il modulo RF EP1/EP2 è lo stesso di PP RX e utilizza l\'MCU ESP8285, l\'EP2 RX, a differenza dell\'EP1 RX ha un Antenna ceramica incorporata. Firmware aggiornabile tramite WIFI, bassa latenza e altra frequenza di refresh, quindi questo prodotto è perfetto per l\'utilizzo su Droni FPV Racer, Freestyle e soprattutto Long Range.
iFlight SucceX-D Mini F7 TwinG V2 2-6S Flight Controller (ICM20689)
The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
T-Motor F7 PRO Flight Controller con WiFi + Bluetooth
T-Motor\'s F7 Pro Flight Controller has arrived! Enjoy full function in a wireless state! Great for cinematic professional use. This FC features 8 UARTS, WiFi and Bluetooth capabilites, and a 30.5x30.5 mounting pattern.
T-Motor Pacer F7 Flight Controller
T-Motor\'s Pacer F7 USB-C Flight Controller is designed to work seamlessly with the F45A 2.0, F55A Pro II, V45A, P50A, P60A 4-in-1 ESC.
T-Motor Velox V45A V2 ESC 45A 4in1 BLHeli_32 3-6S DShot1200
The V45A 4-in-1 ESC V2 by T-Motor is inspired by the VELOX V2207 and V2306 Motors! The V45A V2 MOS has been upgraded with a 15% performance increase to fly in confidence even during high-current spikes.
T-Motor Velox V50A ESC 50A 4in1 BLHeli_32 3-6S
The Velox V50A 4-in-1 ESC by T-Motor is the ultimate ESC for your build. Adopting the QN3109 1.5 MOS, the V50A has been upgraded with an 18% performance increase to fly in confidence even during high-current spikes.
T-Motor Pacer P50A ESC 50A 4in1 BLHeli_32 3-6S
The P50A 4-in-1 ESC by T-Motor is inspired by the PACER P2208 Motors! This high-performance ESC matches the original BLHeli_32 firmware, so no need to worry about a high current shock, yet you will get a smooth flying experience like never before! This ESC comes with an integrated 10V/2a BEC, which is great for providing more electronic power for the DJI HD VTX and other FPV equipment.
The brand new cooling fin design makes heat dissipation more efficient and guarantees stable power output. Also via design for motor pads make over-current ability stronger and welding easier.
T-Motor F55A PROII ESC 55A 4in1 BLHeli_32 3-6S DShot1200
The F55 Pro II updates the original F55 with a new heatsink design, LED, and increased the BEC current to 10V@2A.
Flywoo GOKU 406S 8bit 2-6S 40A 4in1 ESC (20x20)
Flywoo GOKU 406S 8bit 2-6S ESC (20x20)
Flywoo GOKU Versatile F745 Pro Stack (F745 FC + 50A ESC) 8Bit 2-6S (30.5x30.5)
GOKU Versatile F745PRO FC is a versatile and powerful flight control equipped with the smallest but most powerful F745 BGA Chipsets instead of ordinary QFP (Big Size) MCUs. DJI Plug&Play plug and so many UARTs most people wouldn\'t even use em\' all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more.
Flywoo GOKU GNF4 13A V2.1 Stack (F411 FC + 13A ESC) 16x16
Flywoo GOKU GNF4 13A V2.1 Stack (F411 FC + 13A ESC) 16x16
HappyModel Modulo RX 2.4 GHz ExpressLRS ELRS Serie Nano EP2
Il ricevitore della serie nano Happymodel 2.4GHz ELRS, Brandizzato By Radiomaster, aderisce al programma open source basato su ExpressLRS. Sulla base di PP RX, è stato sviluppato questo ricevitore Nano 2.4 GHz della versione ESP8285 denominata EP1 ed EP2. Il modulo RF EP1/EP2 è lo stesso di PP RX e utilizza l\'MCU ESP8285, l\'EP2 RX, a differenza dell\'EP1 RX ha un Antenna ceramica incorporata. Firmware aggiornabile tramite WIFI, bassa latenza e altra frequenza di refresh, quindi questo prodotto è perfetto per l\'utilizzo su Droni FPV Racer, Freestyle e soprattutto Long Range.
HappyModel ExpressLRS ELRS 2.4 GHz Kit Modulo ES24TX
Questo Modulo TX, progettato da Happymodel, basato sul Firmware Open Source ExpressLRS, è un modulo RF a bassa latenza e con alta velocità di re-flash. E\' già diventato molto popolare nel mondo dell\'RC, impiegato dagli Hobbysti di modellismo dinamico sia di aerei che piloti di Droni FPV. La sua architettura hardware principale è il chip RF ESP32, ESP8285 e SX1280. Il modulo ES24TX è una soluzione completa già pronta, con Firmware Expresslrs già precaricato e totalmente Plug and Play!
BetaFPV Nano RX 2.4 GHz ExpressLRS ELRS
Il ricevitore BETAFPV Nano si basa sul progetto ExpressLRS, un progetto open source per applicazioni RC. ExpressLRS mira a ottenere le migliori prestazioni di collegamento possibili in entrambe le velocità, latenza e gamma. Ciò rende ExpressLRS uno dei collegamenti RC più veloci disponibili pur offrendo prestazioni a lungo raggio.
BetaFPV Nano RX 868 MHz ExpressLRS ELRS
Il ricevitore BETAFPV Nano si basa sul progetto ExpressLRS, un progetto open source per applicazioni RC. ExpressLRS mira a ottenere le migliori prestazioni di collegamento possibili in entrambe le velocità, latenza e gamma. Ciò rende ExpressLRS uno dei collegamenti RC più veloci disponibili pur offrendo prestazioni a lungo raggio.
iFlight RX ExpressLRS ELRS 2.4GHz + Mini Antenna 70mm
It\'s finally here, the iFlight ELRS System! Extreme range and markets highest packet rate for lowest delay. Failsafes are a thing of the past.
ExpressLRS RX modules developed in close cooperation with the ExpressLRS Team with firmware targets already released.
iFlight RX ExpressLRS ELRS 868/915MHz + Mini Antenna 70mm
It\'s finally here, the iFlight ELRS System! Extreme range and markets highest packet rate for lowest delay. Failsafes are a thing of the past.
ExpressLRS RX modules developed in close cooperation with the ExpressLRS Team with firmware targets already released.
TBS Crossfire Taranis Q X7 Mod
Improve your FrSky QX7 by modding the JR Bay\'s telemetry port to allow 400kbaud throughput speed instead of just 100kbaud.
Lumenier LUX HD Lite F7 Flight Controller
The Lumenier LUX HD Lite F7 Flight Controller is DJI HD System Ready with an on-board 9v regulator to power the DJI Air Unit in a simple plug and play configuration. It uses a powerful F7 processor along with top of the line hardware. Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX HD Lite F7 Flight Controller. This LUX HD Lite F7 comes in a standard 30.5x3.5 form factor weighing only 7g! The bottom of the FC is also completely flat without any components, making it super low profile and easy to stack above a 4in1 ESC for example.
Lumenier ELITE 60A ESC 4in1 2-6S BLHeli_32
Introducing the The Lumenier Elite 60A 2-6S BLHeli_32 4-in-1 ESC. A powerful ESC with the latest BLHeli_32 + telemetry and current sensor and capable of 60A current support on up to 6s! If you\'re looking for maximum power and performance for your quadcopter, this is the ESC for you.
Axisflying ExpressLRS ELRS 2.4GHz RX + Antenna
Axisflying ExpressLRS ELRS 2.4G RX + Antenna
Flywoo Adattatore USB Type-C Maschio / Type-C Femmina
For those hard to reach DJI Air unit and Caddx Vista USB-C port connections this is a great little adapter!
Also works with flight controllers that utilize C-type connector.
Flywoo Adattatore USB Micro Maschio / Type-C Femmina
For those hard to reach flight controllers that have micro usb connector this is a great little adapter!
Flywoo TVS Power Filter PCB
The new filtering solution for FPV hobby, it has the perfect filtering effort on high frequency interference generated by ESC.
TBS Crossfire/Tracer Nano RX Adattatore PWM 6ch
With this board you can enable connectivities with your servos via 6ch PWM.
Flywoo GOKU Versatile F405 Pro Mini Stack (F405 FC + 40A ESC) 8Bit 2-6S (20x20)
Flywoo GOKU Versatile F405 Pro Mini Stack (F405 FC + 40A ESC) 8Bit 2-6S (20x20)
Flywoo GOKU BS 35A 2-6S ESC 16x16mm
Flywoo Goku F4 35A 16X16 STACK, the smallest size! Large output current!
Flywoo GOKU GN745 40A AIO BL_32 V1.2 1MB 25.5x25.5 (MPU6000)
FLYWOO new top GOKU series AIO are finally here! GOKU GNF745 40A FC is currently the highest level of all-in-one FC, which can meet all your FPV needs.
Flywoo GOKU GN405S 40A AIO 25.5x25.5 (MPU6000)
FLYWOO new top GOKU series AIO are finally here! GOKU GN405 40A FC is an economical and durable all-in-one AIO , which can meet most your FPV needs.
Use powerful F405 chip , integrate 5V BEC, barometer, black box, WS2812LED, support 6 complete hardware serial ports, I2C and other functions are all open.
iFlight BLITZ F7 Pro Flight Controller 35x35
iFlight BLITZ F7 Pro Flight Controller 35x35
iFlight BLITZ E80 4-IN-1 Pro 80A ESC (G2)
The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V.
iFlight BLITZ Modulo BEC
The BLITZ ESC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 35V to a low output stable voltage, which makes it ideal for step-down voltage applications.
-
Offerte speciali
-
Prodotti di tendenza
-
Nuovi prodotti